Choosing the Right Derma Roller Needle Density
Choosing the right derma roller needle density for your skin is essential for achieving optimal results in your skincare routine. The needle density can significantly impact the effectiveness and safety of your dermarolling therapies. This article delves into the various factors influencing needle density selection, including skin sensitivity, the application area, and specific treatment goals.
Understanding these aspects will help you customize your microneedling experience, ensuring not only effective results but also safe and comfortable treatments. By considering these key factors, you can make an informed decision on which needle density is best suited to your individual skin needs, whether you’re targeting acne scars, fine lines, hair loss, or general skin rejuvenation.
Understanding Derma Roller Needle Density and Its Factors
This guide equips you with the knowledge needed to make informed decisions about microneedling, from understanding the differences between low and high needle densities to recognizing the importance of skin type, thickness, and treatment area. Whether you’re a beginner just starting out or an experienced user looking to refine your routine, you’ll learn how to choose the right derma roller needle density for your skin. By doing so, you’ll be able to maximize the benefits of your treatments while minimizing potential risks such as irritation or discomfort. With the right information, you can confidently tailor your microneedling experience to address specific concerns like acne scars, wrinkles, hair thinning, or overall skin rejuvenation.
Factors Influencing Derma Roller Needle Density Selection
Understanding Derma Roller Needle Density
Derma roller needle density refers to the variety of needles installed on the roller’s surface area. This thickness plays an important role in determining the device’s efficiency for numerous skin therapies. Choosing the best needle density can directly impact the results and lessen potential negative effects.
Skin Sensitivity and Condition
The key factor to consider when selecting a derma roller is your skin’s level of sensitivity. Individuals with delicate skin, prone to redness, irritation, or inflammation, should opt for derma rollers with a lower needle density. These rollers are gentler and less likely to cause discomfort or adverse reactions. On the other hand, those with more resilient skin or specific concerns, such as acne scars, deep wrinkles, or stretch marks, may benefit from a higher needle density. A higher density allows for deeper penetration, which can help address more severe skin issues and promote collagen production for more noticeable results. However, it’s important to assess your skin’s response and adjust accordingly to avoid over-exfoliation or unnecessary irritation.
Area of Application
The area of skin being treated plays a significant role in selecting the appropriate needle density. For delicate facial areas, such as around the eyes or lips, a lower needle density is generally recommended to ensure a gentle treatment. In contrast, larger skin areas, like the forehead or cheeks, may require a higher needle density to provide optimal coverage and effectiveness.
Preferred Treatment Goals
Your treatment goals play a crucial role in determining the appropriate derma roller needle density:
| Skin Concern | Advised Needle Density |
|---|---|
| Great Lines and Light Scarring | Low to Medium |
| Deep Wrinkles and Acne Scars | High |
| General Skin Rejuvenation | Medium |
Experience Level
For beginners or those new to microneedling, it’s recommended to start with a derma roller that has a lower needle density. This ensures minimal discomfort and reduces the risk of improper usage. As users become more familiar with the process and their skin adapts, they can gradually progress to higher needle densities for more intensive treatments.
Product Quality and Brand
Not all derma rollers are created equal. High-quality rollers from reputable brands typically feature uniform needle placement, which is essential for safe and effective treatments. When selecting a device with the desired needle density, always prioritize certified products to ensure both reliability and safety during your microneedling sessions.
Analyzing Your Skin Type for Optimal Needle Density
When selecting the ideal derma roller needle density, recognizing your skin kind is an essential step. Each skin type responds differently to microneedling, making it important to tailor your selection based on individual features.
Identifying Your Skin Type
To establish the ideal derma roller needle density, begin by evaluating your skin type. Broadly, skin can be categorized as typical, oily, completely dry, delicate, or mixed. Each type has special needs and tolerances when exposed to microneedling therapies. For instance, sensitive skin may need a reduced needle thickness to decrease irritation, while regular skin can commonly endure greater densities without damaging effects.
Structure and Elasticity Considerations
Beyond basic skin type, it’s important to consider the texture and elasticity of your skin. Individuals with smooth, firm skin typically benefit from moderate to higher needle densities for more stimulation and collagen production. Conversely, those with rough or uneven skin texture may require lower needle densities to prevent excessive trauma and ensure a gentler treatment.
Skin’s Hydration and Oil Balance
The hydration level and oil equilibrium of your skin additionally play a role in establishing suitable needle density. Dry or dried skin is a lot more susceptible to micro-tears, making a lower thickness a good idea. Oily skin, on the other hand, can frequently handle greater needle thickness, provided there are no energetic inflammations like acne.
Special Considerations for Sensitive Skin
If you have sensitive skin, proceed with caution. Start with a lower needle density and closely monitor how your skin responds. It’s essential to introduce microneedling gradually, allowing your skin time to build tolerance and reducing the likelihood of soreness or irritation. Choosing derma rollers with high-quality, fine needles can further enhance safety, providing a gentler experience for sensitive skin types.
Testing for Allergies or Reactions
Finally, it’s important to perform a patch test before committing to a specific derma roller needle density. This helps ensure that your skin does not react negatively to the tool or the products being used. A controlled test on a small area of skin provides valuable insight into how your skin will respond to the full treatment, allowing you to proceed with confidence.
Matching Needle Density to Specific Skin Concerns
Selecting the ideal derma roller needle density depends largely on the specific skin concerns you aim to address. Different needle densities offer targeted benefits, allowing for tailored treatments that enhance the effectiveness of your skincare routine. Whether you’re targeting fine lines, acne scars, or overall skin rejuvenation, choosing the right density ensures you achieve the best possible results for your unique skin needs.
Reduced Needle Density for Gentle Skin Concerns
For individuals with sensitive skin or those new to derma rolling, a lower needle density is typically advised. This option is well-suited for addressing mild concerns such as:
| Skin Concern | Advised Needle Density |
|---|---|
| Fine lines | 100-200 needles |
| Unequal skin tone | 100-200 needles |
| General skin renewal | 200 needles |
High Needle Density for Advanced Skin Concerns
When dealing with more prominent concerns, such as scars or stretch marks, derma rollers with higher needle densities are often more effective. These devices provide deeper skin penetration with each pass, making them ideal for addressing issues like:
| Skin Concern | Suggested Needle Density |
|---|---|
| Acne scars | 500-1000 needles |
| Stretch notes | 800-1200 needles |
| Deep creases | 600-1000 needles |
Personalizing Needle Density for Combination Skin Concerns
If you are managing a mix of skin problems, think about a derma roller with adjustable needle density or utilizing numerous rollers with differing thicknesses. As an example:
| Combination Concern | Recommended Approach |
|---|---|
| Great lines and acne scars | Start with 200 needles for fine lines; shift to 500 needles for marks |
| Stretch marks and restoration | Use 800 needles for stretch marks and 200 needles for overall complexion |
Consistency and Monitoring Results
It is important to monitor your skin’s action to the selected derma roller needle density. Regular use, incorporated with correct aftercare, can considerably enhance outcomes while decreasing risks. Change your needle thickness as your skin issues develop to ensure the finest results.
Contrasting Low vs. High Needle Density Derma Rollers
When selecting a derma roller, understanding the differences between low and high needle densities is crucial for achieving optimal results. Each type serves distinct purposes and caters to specific skin needs, so it’s important to choose a device that aligns with your individual skincare goals. Matching the right needle density to your requirements ensures both safety and effectiveness during treatment.
What is Low Needle Density?
Low needle density derma rollers feature fewer needles on the roller head, typically spaced further apart. This design allows for more precise application and reduces the risk of skin irritation, making them ideal for individuals with sensitive skin or those targeting smaller, localized areas like scars or fine lines. The reduced needle density also exerts less pressure on the skin, promoting faster recovery times after treatment.
What is High Needle Density?
High needle density derma rollers, in contrast, feature a greater number of needles spaced closely together on the roller head. This configuration increases coverage area, making them ideal for broader applications such as improving overall skin texture or stimulating collagen production across the entire face. However, the higher needle density can also elevate the risk of irritation, especially for individuals with thin or sensitive skin.
Effectiveness Based on Skin Concerns
The choice between low and high needle density largely depends on your specific skin concerns. If you’re targeting localized issues such as deep acne scars or fine wrinkles, a low needle density roller offers the precision needed to effectively address these areas. On the other hand, if your goal is to treat broader concerns like uneven skin tone or enhance skin elasticity, a high needle density roller can deliver faster, more uniform results across larger areas.
Factors To Consider for Skin Tolerance
Your skin’s tolerance to microneedling is also a key factor in choosing the right derma roller needle density. Beginners or individuals with sensitive skin generally benefit from starting with a lower needle density to minimize discomfort and allow their skin to gradually adjust. As their tolerance builds, they can increase the needle density over time. Advanced users with more resilient skin may prefer higher needle densities to maximize the treatment’s effectiveness and achieve more noticeable results.
Practical Usage Tips
It is very important to adjust your application technique based on needle density. Low needle thickness rollers need even more focused rolling on trouble areas, whereas high needle thickness rollers can cover larger locations with fewer passes. No matter of density, ensure the roller is sterilized before use and prevent applying extreme pressure to avoid skin damage.
Choosing Derma Roller Needle Density Based on Facial Skin Thickness
Understanding Facial Skin Thickness
Facial skin thickness varies across different areas of the face and between individuals. Factors like age, genetics, and overall skin health play a significant role in determining this variation. For instance, the skin around the eyes and lips is generally thinner than areas like the temple or jawline. Understanding these differences is essential when selecting the appropriate derma roller needle density, ensuring that the treatment is tailored to the specific needs of each area to achieve the best results.
Recommended Needle Densities for Different Skin Thickness Levels
The effectiveness of a derma roller is highly dependent on matching its needle density to the natural thickness of your skin. Using the appropriate needle density ensures optimal results while minimizing the risk of irritation or damage. Tailoring the needle density to the specific area of treatment helps achieve the best possible outcomes, promoting safe and efficient skin rejuvenation.
| Facial Area | Skin Thickness | Recommended Needle Density |
|---|---|---|
| Temple | Medium (1.7-2.0 mm) | Medium to High (190-540 needles) |
| Cheeks | Thick (2.0-2.5 mm) | Medium to High (190-540 needles) |
| Eye Area | Thin (0.5-0.7 mm) | Low (120-200 needles) |
| Nose | Slim to Medium (0.7-1.5 mm) | Low to Medium (120-300 needles) |
| Jawline | Medium to Thick (1.5-2.2 mm) | Medium to High (190-540 needles) |
Key Considerations for Thin and Sensitive Skin
For thinner or more sensitive areas, such as the under-eye region, it’s essential to use derma rollers with a low needle density. These rollers apply less pressure on the skin, reducing the risk of irritation or injury. Opt for needle densities ranging from 120 to 200 needles for delicate areas to ensure a gentler treatment while still achieving effective results.
Matching Needle Density to Thicker Skin
In areas with thicker skin, such as the forehead or jawline, higher needle densities (typically ranging from 300 to 540 needles) are recommended. This increased density allows for deeper and more even penetration, enhancing the derma roller’s effectiveness in stimulating collagen production and improving overall skin texture and appearance.
Balancing Needle Density and Skin Sensitivity
When selecting the ideal derma roller needle density, it’s important to find a balance between skin thickness and sensitivity. If your skin is thicker but prone to inflammation, a moderate needle density (190-300 needles) may be more appropriate. This range ensures effective treatment while minimizing the risk of over-stressing or irritating the skin.
Adjusting Needle Density Based on Skin Type
People with combination skin may need to adjust the needle density based on the area being treated. For example, a lower needle density may be suitable for thinner, more sensitive areas like the nose, while a higher density could be used for thicker areas such as the cheeks or jawline. Tailoring the needle density to each specific area ensures a more customized and effective treatment.
Testing and Monitoring
Before committing to a specific derma roller, it’s advisable to test the chosen needle density on a small patch of skin to assess comfort and compatibility. Monitor your skin’s response after each session to ensure that the selected needle density is effective without causing any adverse reactions or irritation. This approach allows you to fine-tune your treatment for optimal results while minimizing risks.
Significance of Needle Material in Derma Rollers
When selecting a derma roller, the needle material is crucial for ensuring both effectiveness and safety. The quality and structure of the needles directly impact the device’s performance, especially when considering the ideal needle density for your skin type and specific concerns. High-quality needles, such as those made from titanium or stainless steel, provide smoother, more precise microneedling, which is essential for achieving optimal results without causing unnecessary irritation or damage.
Common Derma Roller Needle Materials
Derma roller needles are usually made from materials such as stainless steel or titanium. Each option has unique residential properties that accommodate different preferences and skin demands:
- Stainless Steel: Known for its sharpness and precision, stainless steel is a popular choice for derma rollers due to its ability to create cleaner microchannels in the skin. It is less likely to cause irritation, making it an excellent option for individuals with sensitive skin. Stainless steel’s durability and smoothness help ensure a more comfortable and effective microneedling experience.
- Titanium: Titanium needles are more durable and resistant to dulling over time compared to other materials. This makes them particularly well-suited for individuals using higher needle densities or those who perform treatments frequently. Titanium needles maintain their sharpness, ensuring consistent, long-term performance and enhancing the effectiveness of each microneedling session.
Impact of Needle Material on Density Selection
The choice of material significantly impacts both the needle’s ability to penetrate the skin and its overall lifespan. For high needle density rollers, durable materials like titanium are essential to maintain performance over time without compromising safety. Titanium’s resilience ensures that the needles remain sharp and effective, even with frequent use. On the other hand, lower-density rollers, which are often used on more delicate areas, may benefit from the precision and gentleness of stainless steel. Stainless steel provides a smoother, more refined experience, minimizing irritation while still offering accurate microchannel formation.
Hygiene and Maintenance
Hygiene is paramount when using a derma roller. Stainless steel is less porous, making it easier to clean and maintain, which helps prevent the buildup of bacteria. On the other hand, titanium’s durability ensures that the needles remain sharp and effective, reducing the risk of tearing or dragging on the skin, even with frequent use. Regardless of the material, proper sterilization of the derma roller is essential to prevent infections and ensure safe, effective results. Regular cleaning and disinfecting of the device after each use are crucial for maintaining hygiene and promoting healthy skin outcomes.
Security Considerations with Needle Material
High-quality products are essential to prevent skin damage or irritation during treatments. Poorly made needles, regardless of their density, can lead to uneven penetration or even breakage during use, which can result in complications. Always choose derma rollers from reputable microneedle roller manufacturers to ensure the devices meet dermatological safety standards. This guarantees that the needles are durable, precise, and safe for use, minimizing the risk of adverse effects and optimizing treatment results.
Needle Material and Professional Recommendations
When determining the ideal combination of derma roller needle density and product, consulting a professional is invaluable. A skincare expert can assess your skin type, concerns, and treatment goals to recommend the most suitable options, ensuring optimal results while minimizing risks. Their expertise helps tailor the treatment to your individual needs, providing guidance on needle density, material, and usage frequency for safe and effective outcomes.
Safety Considerations When Choosing Derma Roller Needle Density
When choosing the appropriate derma roller needle density, safety should be a top priority to minimize the risk of adverse effects and ensure optimal results. Incorrect choices can lead to irritation, skin damage, or suboptimal outcomes. Here are key safety considerations to keep in mind:
1. Comprehending Skin Sensitivity
Different skin types have varying degrees of level of sensitivity. People with delicate or reactive skin must choose lower needle density to avoid excessive inflammation. Alternatively, those with resistant or thicker skin might tolerate higher needle density safely. Constantly analyze your skin’s tolerance before devoting it to a details density.
2. Avoiding Overcrowding of Needles
While higher needle densities can cover more surface location in one session, exceedingly dense plans may apply way too much stress on the skin, boosting the threat of microtears or inflammation. It is necessary to strike an equilibrium between insurance coverage and security.
3. Guaranteeing Proper Sterilization
The material and construction of needles straight impact health safety and security. Choose medical-grade stainless steel or titanium needles, as they are long-lasting and much less vulnerable to contamination. Always guarantee the derma roller is thoroughly disinfected before each usage to minimize the risk of infections.
4. Selecting the Right Needle Density for Problem Areas
Certain areas of the face, such as around the eyes and lips, are more delicate and require extra care. For these regions, opt for a lower needle density to ensure a gentle treatment while addressing specific concerns. Higher-density rollers can be reserved for less sensitive areas like the cheeks or forehead.
5. Keeping Track Of Pressure Application
Regardless of the chosen needle density, applying excessive pressure can harm the skin. Even with lower-density rollers, it’s important to use gentle and consistent pressure to achieve effective results without causing damage to the skin.
6. Patch Test Before Full Use
Before using a new derma roller, especially one with a higher needle density, it’s important to perform a patch test on a small area of skin. This helps identify any potential allergic reactions or sensitivity issues, ensuring safe use before treating larger areas.
7. Maintaining Skin Conditions in Mind
Individuals with active acne, eczema, or other inflammatory skin conditions should avoid using high-density derma rollers, as they can exacerbate these issues. It’s important to consult with a dermatologist if you have concerns about how the needle density of a derma roller may impact pre-existing skin conditions.
Needle Density and Skin Sensitivity Table
| Skin Type | Recommended Needle Density | Secret Safety Tips |
|---|---|---|
| Delicate | Low (100-200 needles) | Use gentle stress, to prevent fragile areas |
| Normal | Tool (200-400 needles) | Maintain proper sanitation |
| Thick/Resilient | High (400+ needles) | Test for irritability, avoid overuse |
8. Expert Guidance
If you are not sure about the appropriate derma roller needle density for your skin, consulting a skin specialist or skin care expert is suggested. They can offer personalized advice based on your skin’s unique needs and ensure secure and effective therapy.
Consulting Professionals for Personalized Recommendations
When choosing the best derma roller needle density for your skin, speaking with experts can give invaluable understandings customized to your special requirements. While general guidelines and personal research are valuable, a dermatologist or licensed skincare professional can examine your skin condition, kind, and goals much more extensively.
Why Professional Guidance Matters
Every person’s skin is unique, and factors such as skin sensitivity, existing skin conditions, and treatment goals play a crucial role in selecting the right derma roller needle density. Experts have the knowledge and experience to assess these factors and recommend a derma roller that is both safe and effective for your specific needs. Their guidance ensures you choose the most suitable tool to achieve optimal results while minimizing potential risks.
Benefits of Consulting a Professional
| Advantage | Details |
|---|---|
| Precise Skin Assessment | Experts can examine your skin type, thickness, and issue areas to recommend suitable needle density. |
| Individualized Recommendations | Customized suggestions ensure the therapy aligns with your one-of-a-kind skincare objectives, reducing dangers. |
| Low Risk | Guidance from specialists reduces the chances of irritability, infection, or overuse. |
| Post-Treatment Support | Specialists can give aftercare referrals to optimize outcomes and shield your skin. |
What to Expect During a Consultation
During an assessment, the professional will typically do the following:
- Examine your skin to establish its thickness, appearance, and sensitivity.
- Determine specific problems, such as great lines, acne marks, or pigmentation, and straighten them with the ideal derma roller needle density.
- Review your skincare background and existing regular to ensure compatibility with derma rolling.
- Recommend a derma roller needle density and product (e.g., stainless steel or titanium) ideal for your requirements.
Picking the Right Professional
It is very important to consult with certified skin specialists or trained aestheticians with experience in microneedling. Check their credentials, evaluations, and qualifications to guarantee you receive reliable and expert assistance.
When to Seek Professional Input
Consulting a professional is particularly recommended if you:
- Have delicate or reactive skin.
- Struggle with details skin problems such as dermatitis, rosacea, or serious acne.
- Doubt concerning selecting the appropriate needle density for your skin goals.
- Intend to take full advantage of the effectiveness of derma rolling while minimizing dangers.
Conclusion
While it may be tempting to choose a derma roller on your own, consulting with a professional ensures that the derma roller needle density and material are perfectly matched to your skin’s unique needs. A skincare expert can evaluate your skin type, concerns, and goals to recommend the ideal roller for your treatment. This step not only optimizes the effectiveness of the microneedling process but also helps protect your skin from potential complications such as irritation or scarring. Personalized advice is crucial in ensuring you select the right needle density, ensuring both safety and maximum results. With expert guidance, you can confidently move forward in your skincare journey, knowing you’re making the best choice for your skin.
Frequently Asked Questions (FAQs) About Choosing Derma Roller Needle Density
What is the recommended derma roller need density for beginners?
For beginners, it’s best to start with a derma roller that has a needle density of around 192 or 300 needles. This density is effective for mild treatments while minimizing discomfort or irritation, allowing your skin to gradually adjust to the microneedling process.
How does derma roller need density affect treatment results?
The need density of a derma roller directly impacts the depth and intensity of the treatment. A higher needle density (e.g., 540 or more needles) can penetrate deeper into the skin, providing more dramatic results for issues like scars, wrinkles, and stretch marks. However, this may also increase discomfort, so it’s important to match needle density with your skin’s tolerance.
Can derma roller need density impact hair growth results?
Yes, the derma roller’s need density can affect hair regrowth results. A roller with 540 needles is commonly used for hair restoration, as it can help stimulate the scalp and promote better absorption of hair growth serums. Lower-density rollers, such as those with 192 needles, may be less intense but can still support hair growth for mild cases.
Is higher derma roller need density better for skin rejuvenation?
Higher needle density can indeed provide more effective skin rejuvenation, as it encourages deeper collagen production and skin repair. A derma roller with 540 needles, for example, is ideal for more aggressive treatments like wrinkle reduction, while a lower density may be better for light skin maintenance or sensitive areas.
How often should I use a derma roller based on need density?
The frequency of use depends on the derma roller’s needle density. For a roller with 192-300 needles, you can safely use it 1-2 times a week. However, for a roller with 540 needles, it’s best to limit use to every 3-4 weeks, as the skin needs more time to recover after deeper microneedling.
What are the risks of using a high-need density derma roller?
Using a high-need density derma roller (such as one with 540 or more needles) can increase the risk of skin irritation, redness, or even damage if not used properly. It’s important to follow proper techniques, use a sterilized device, and ensure adequate aftercare to minimize potential side effects.
Can I use a high-density derma roller on sensitive skin?
For sensitive skin, it’s generally advisable to avoid high-need density derma rollers (e.g., 540 needles), as they may cause too much irritation. A roller with a lower needle density, like 192 or 300, is a safer choice for sensitive skin while still providing effective results.
What needle density is most effective for treating acne scars?
For acne scars, a derma roller with a needle density of 540 needles is often the most effective. The increased needle density allows for deeper penetration into the scar tissue, stimulating collagen production and helping to smooth the skin’s surface. For mild scars, a 192-needle roller can also yield good results.
What is the difference in results between low and high derma roller need density?
Low-need density derma rollers (192-300 needles) are typically used for gentler treatments such as maintaining healthy skin, reducing fine lines, or boosting product absorption. High-need density rollers (540 or more needles) provide deeper penetration, leading to more noticeable results for treating severe scars, wrinkles, or stretch marks but with greater risk of irritation.
Does the derma roller need density affect pain levels?
Yes, the need density of a derma roller affects how painful the treatment will feel. A higher needle density means more needles are penetrating the skin, which can lead to more discomfort during the procedure. For those with low pain tolerance or beginners, it’s recommended to start with a roller with a lower needle density.
References
- Healthline, “What Is Microneedling?”, https://www.healthline.com/health/microneedling
- WebMD, “Microneedling for Acne Scars: Benefits and Side Effects”, https://www.webmd.com/skin-problems-and-treatments/acne/microneedling-for-acne-scars
- Medical News Today, “Microneedling: What It Is and What It Can Do”, https://www.medicalnewstoday.com/articles/320808
- Verywell Health, “Microneedling: Benefits, Side Effects, and Costs”, https://www.verywellhealth.com/microneedling-benefits-side-effects-and-costs-5200300
- The Derm Review, “Best Derma Rollers for 2023”, https://www.thedermreview.com/best-derma-rollers/
- Health.com, “Microneedling: A Complete Guide”, https://www.health.com/microneedling-guide-5171070
- Dermstore, “The Ultimate Guide to Microneedling: Benefits, Pain, and Risks”, https://www.dermstore.com/blog/microneedling-guide
- Allure, “What Is Microneedling and How Does It Work?”, https://www.allure.com/story/what-is-microneedling
- Byrdie, “How to Use a Derma Roller at Home Safely”, https://www.byrdie.com/how-to-use-derma-roller-5186901
- Everyday Health, “Microneedling for Hair Growth: What You Need to Know”, https://www.everydayhealth.com/skin-beauty/microneedling-for-hair-growth/
- The Skin Care Edit, “Derma Rollers: A Beginner’s Guide”, https://www.theskincareedit.com/derma-rollers-beginners-guide
- Shape, “Is Microneedling Worth It for Wrinkles?”, https://www.shape.com/beauty/microneedling-for-wrinkles
- Dermaluxe, “How to Choose the Right Derma Roller for Your Skin”, https://www.dermaluxe.com/blogs/blog/how-to-choose-right-derma-roller
- Refinery29, “Microneedling for Acne Scars: Does It Really Work?”, https://www.refinery29.com/en-us/2018/02/188235/microneedling-for-acne-scars
- Self, “Does Microneedling Help with Stretch Marks?”, https://www.self.com/story/does-microneedling-help-with-stretch-marks
- Tatcha, “Microneedling Benefits for Skin: What You Should Know”, https://www.tatcha.com/blogs/blog/microneedling-benefits
